Re: 1.1.5 getting mesh bed leveling working
QuoteJustSumGuy There is not enough room in the cube frame to install a probe that I can work out yet. I placed my Probe under the extruder frame with an adjustable bearing mount slide. With a low...
View ArticleRe: Marlin 1.1.5
QuoteJustSumGuy sounds like the controller then. I thought is was the controller also so I replaced with my backup controllers, to which I have one for each 3D Printer. If it is bad then I have 4 bad...
View ArticleRe: Marlin 1.1.5
what kind of controllers are these? have you made any adjustments to the stock fw other than to set the board type?
View ArticleRe: Marlin 1.1.5
Hictop Two MPX .3 [attachment 98086 MPX.3.jpg] And two Base V1.3 added heat sink to all Mosfets and fans. [attachment 98087 Controller1.jpg] If I could get the code Changes Between Marlin 1.1.0 and...
View ArticleHelp Frimware Delta mini
I have a Delta printer but I have a case Slow down the delta speed too slow how can i set up the marlin firmware?
View ArticleRe: Marlin 1.1.5
QuoteRoberts_Clif QuoteJustSumGuy sounds like the controller then. I thought is was the controller also so I replaced with my backup controllers, to which I have one for each 3D Printer. If it is bad...
View ArticleRe: Compiler Error
Hi, I have an update..... So not having any luck, i tried just verifying (no mega2560 attached) the standard files for a "MOTHERBOARD BOARD_RAMPS_14_EFB". No changes made at all. Same error : Arduino:...
View ArticleRe: Compiler Error
there is also a hidden directory (windows loves to hide things from its users) part of ardunio ide... remove that also when reinstalling On Windows: Arduino IDE 1.6.5r5 and previous:...
View ArticleRe: Marlin 1.1.5
As of today I have compiled and flashed every version of marlin 1.1.X Setup and Complied Marlin 1.1.0 displays works perfect. Still using trying to upgrade to Marlin 1.1.5 for Hictop 3DP11/12 AL Setup...
View ArticleRe: Marlin 1.1.5
QuoteRoberts_Clif All functions work perfectly only displaying " Endstops Z " or sometimes " G28 Z Forbidden " thou still Prints a perfect 3D Model. M500 " CRC memory errors ???? " are scary because...
View ArticleRe: 1.1.5 getting mesh bed leveling working
I wonder if the Omron TL-W3M could pick up my aluminum bed thru the 2mm PEI sheet thats glued to it......
View ArticleRe: 1.1.5 getting mesh bed leveling working
Would think so I have a Hictop 220 X 270 Aluminum Bed covered with a BuildTac surface, And I can do a Start G-Code " G29 " Bi-linear " 5 X 5 = 25 point " Auto Bed Level / 3D Print From the many Slicer...
View ArticleRe: Marlin 1.1.5
Yes exactly where I got the errors, doing M502, M500 several time even thinking the error would go away. I was doing The M500 when the error occurred. I guess I stated this way back in Marlin1.1.4...
View ArticleRe: Marlin 1.1.5
QuoteRoberts_Clif Yes exactly where I got the errors, doing M502, M500 several time even thinking the error would go away. I was doing The M500 when the error occurred. I guess I stated this way back...
View ArticleRe: Marlin 1.1.5
QuoteRoxy OK! That definitely should not happen! v2.0.0 is going to be showing up soon. When it does, I'll be bringing it up on several printers. I will be doing M502's and M500's to initialize the...
View ArticleRe: User guide to UBL?
I am really hopeful for UBL to work properly one day. I spent about 5 hours trying to use it today, reading the user guide, and no luck. It sort-of, almost works... just enough to tease me into...
View ArticleIssue uploading Marling Firmware on RAMBo
Guys I need some help here. For a long time I have used RAMPS on my Prusa I3 but I decided to make some upgrades, then I bought a RAMBo and installed it on my printer. The point is that I can't upload...
View ArticleRe: 1.1.5 getting mesh bed leveling working
QuoteJustSumGuy There is not enough room in the cube frame to install a probe that I can work out yet. I would loose some build space if I put it beside the head (Either side), my fan is in front and...
View ArticleRe: Compiler Error
Hi, Thanks for your info. I deleted the hidden folder, uninstalled Arduino 1.8.4. Then i searched all of my hard disks for "Arduino" - just in case !! Re-installed Arduino 1.8.4. Same error when...
View ArticleRe: User guide to UBL?
Any help getting the documentation fully in sync with the code base would be appreciated. First... Hopefully you were able to print a small object at the center of the bed with no bed leveling active....
View Article