Would think so I have a Hictop 220 X 270 Aluminum Bed covered with a BuildTac surface,
And I can do a Start G-Code " G29 " Bi-linear " 5 X 5 = 25 point " Auto Bed Level / 3D Print From the many Slicer Program's I have.
They also have 1.5 - 20 mm sensors, thou I would only suggest the 1.5 - 5mm sensors.
And I can do a Start G-Code " G29 " Bi-linear " 5 X 5 = 25 point " Auto Bed Level / 3D Print From the many Slicer Program's I have.
They also have 1.5 - 20 mm sensors, thou I would only suggest the 1.5 - 5mm sensors.