Re: Compiler Error
Just love making life difficult don't you... how about a ficken URL?!!!!
View ArticleRe: Compiler Error
I tried to Install Arduino 1.8.3 On my desktop with no success uninstalled all but Arduino 1.0.5 could not compile after install Arduino 1.8.3 " YES Arduino 1.8.3" I had Arduino 1.8.1 Previously on...
View ArticleRe: 1.1.5 getting mesh bed leveling working
Quoteleadinglights QuoteJustSumGuy There is not enough room in the cube frame to install a probe that I can work out yet. I would loose some build space if I put it beside the head (Either side), my...
View ArticleBed leveling data saved?
Hi, I've been using Marlin for a couple of weeks in my DIY Prusa clone and my first layer has been very hit and miss and I might have found out why! On the Marlin Wiki it says that the bed leveling...
View ArticleRe: Bed leveling data saved?
I am using Marlin 1.1.5 and the bed leveling data is discarded with a home command and is not saved in Any version of Marlin as of this date. I hear that they are working on a saving the data for bed...
View ArticleRe: Bed leveling data saved?
QuoteRoberts_Clif I am using Marlin 1.1.5 and the bed leveling data is discarded with a home command and is not saved in Any version of Marlin as of this date. I hear that they are working on a saving...
View ArticleRe: Bed leveling data saved?
Here is the code in Cure Start/End-GCode, Place the G29 after your last G28 Command. G28 X0 Y0 ; Home XY ;G29 ; auto level I enable the G29 when I want to use Bed leveling before the Print Had a 5 X 5...
View ArticleRe: Bed leveling data saved?
The thing is I've been using a Davinci for a long time so with my DIY Prusa clone I'm trying different PC hosts and I may not have been doing things consistently and also I used to manually trigger...
View ArticleRe: Bed leveling data saved?
AFAIK, My bed level data is saved to eeprom. Using the command "M420 V" shows probe data and "Bed leveling Off". The probe data on eeprom persists with a G28 because my start gcode always issues G28...
View ArticleRe: Bed leveling data saved?
Quotejaded AFAIK, My bed level data is saved to eeprom. Using the command "M420 V" shows probe data and "Bed leveling Off". The probe data on eeprom persists with a G28 because my start gcode always...
View ArticleRe: Bed leveling data saved?
Thanks for the info. I'll do some experimenting myself. Don't worry, your bed is more level than mine :-)
View ArticleRe: Bed leveling data saved?
From the ubl/mesh bl source You should be able to use G29 S * S Store Store the current Mesh in the Activated area of the EEPROM. It will also store the * current state of the Unified Bed Leveling...
View ArticleHelp Marlin
Please help me with this error Arduino: 1.8.3 (Windows 8.1), Bo mạch:"Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)" In file included from sketch\MarlinConfig.h:39:0, from...
View ArticleCreality Ender-4 GPL violation?
I just got a Creality Ender-4; its ultimately a pretty solid printer- though it does suffer from low production values (my heater cooling fan broke within 14 hours and I had no way to interact with...
View ArticleRe: Creality Ender-4 GPL violation?
If your Y axis is reversed then you should be able to just plug the motor connector the other way around to change its direction. make sure you turn the printer power OFF first tho.
View ArticleRe: Help Marlin
What you have done is taken an older Configuration.h file set and dropped it into a new Marlin code base. The problem is, some of the configuration option names have changed. Those errors are from the...
View ArticleRe: Creality Ender-4 GPL violation?
Yea, I've thought about that- the cords are directional (IE will only plug in one way), so I'd have to cut and rebind; Its not the end of the world even if I don't address it, just need to remember to...
View ArticleRe: Help Marlin
What 3D Printer do you have there may already be a Marlin configured for your Printer.
View ArticleRe: Creality Ender-4 GPL violation?
definitely .... I downloaded your attached Ender-4 automatic leveling.hex Using Linux I converted it to a binary "objcopy -I ihex Ender-4\ automatic\ leveling.hex -O binary Ender-4\ automatic\...
View Article