Trying to switch from mothebroard 34 to 33 in config.h
Want to see what all this cooling fan talk is about. I changed my configuration motherboard line from 34 to 33 but now it will not compile. error log [justpaste.it] and this is a copy and paste of...
View ArticleExtruder Heat Port Always hot
I am using marlin firmware on an arduino based controll board for a Hictop Prusa I3. After the second use of this machine the extruder heater 0 port is always outputting 12V. This problem isnt a...
View ArticleGraphic LCD--Why bother building things that don't work?
So here's my question: Why is a common, readily available and inexpensive component such a massive, recurring problem? The "Discount full graphic LCD Display" seems to be a problem for every single...
View ArticleRe: Extruder Heat Port Always hot
Sorry to ask a question here on first post then answer it hours later. I solved the issue by manually setting the HEATER_0_PIN to 7 on this model. (Hictop Aurora Prusa I3) based on RAMPS 1.3 with...
View ArticleRe: Graphic LCD--Why bother building things that don't work?
The Folger Tech-2020 firmware is very old. You would be better off bringing up the RC-6 RCBugFix branch. And that does support the Full Graphic's Controller.
View ArticleRe: Need Help with configuring Marlin Firmware
The current RC-6 RCBugFix branch should be much easier for you to compile and bring up. It is also very stable. I think we will still do an RC-7 but RC-6 is actually good enough to go 'Golden' and...
View ArticleRe: G29 explanation please
Delta's are very sensitive to measurement errors and mis-matches in rod length. It sounds like you will benefit from the extra Delta configuration parameters that we are adding to M665.
View ArticleRe: G29 explanation please
I need all the help I can get lol. The deltas are definitely fiddly. I have made up a rod length Jig and have adjusted all the rods to be perpendicular and has helped heaps. My print is a bit skewed...
View ArticleRe: Graphic LCD--Why bother building things that don't work?
AFAIK you have to put a line somewhere in marlins code that says " include u8glib.h". Not sure where I found that info, but it's most likely the configuration.h LCD_config section
View ArticleRe: Extruder Heat Port Always hot
I wouldn't feel comfortable, printing with a board that obviously has a hardware problem...
View ArticleRe: G29 explanation please
What did the StarBurst look like when it was printed? Can you post a picture of that with it still stuck to the print bed?
View ArticleRe: Need Help with configuring Marlin Firmware
Thanks I did the RC 6, got it working, but really wanted the other one to work.. I download a older beta version of arduino and it came up with no error, but The firmware is old and doesn't support...
View ArticleHow to setup G29 with RC6?
I dusted off my 3d printer, and decided to update my Marlin firmware. Everything seems to work except auto bed leveling. Firstly I was excited to see mesh leveling available, but found out that it is...
View ArticleRe: Trying to switch from mothebroard 34 to 33 in config.h
Updated 3dcloner firmware if anyone want it. [drive.google.com]
View ArticleMy ULTRA_LCD not complete
My ULTRA_LCD not complete and i can't select or do any think by the selector i have Uncomment define ULTRA_LCD but nothing works Any help???
View ArticleMarlin RC6 Not Booting/Communicating
Running a Printrboard Rev.D, just meticulously went through configuration.h Uploaded it to the board and that was successful But it either appears to not be booting, or not communicating None of the...
View ArticleRe: Marlin RC6 Not Booting/Communicating
How did you get the PrintRboard to compile with the Arduino v. 1.6.9 ???? Do you have the files it takes to let Arduino v. 1.6.9 compile and load a PrintRboard?
View ArticleMarlin RC6 with graphic LCD causes short pauses while printing
Hello to all! I'm new on this forum, since i just recently bought my Kossel Mini delta printer. It had Marlin V1.0.0 with 4x20 LCD, so i bought Full graphic smart controller and loaded RC6 firmware....
View Article