Re: 1.1.8 can not travel past XY 0
why are you trying to move past 0, that should be the edge of your printable area take a picture of your machine, where are you endstops in relation to 0,0 you have very big offsets in the homing...
View ArticleRe: 1.1.8 can not travel past XY 0
Home position switches are to the back right, also X0 Y0 are back right. The Z probe is in front and to the left of the nozzle on the opposite side as the home position limit switches. The travel...
View ArticleRe: 1.1.8 can not travel past XY 0
" If i set the MIN positions to 0 instead of the probe offset distances i get an error when compiling." and this is where you are going wrong... Set the min positions correctly. what is the error? you...
View ArticleRe: 1.1.8 can not travel past XY 0
Sometimes you cant see the forest through the trees i guess. That was it. I swear i had tried that about 5 times before to no avail. Must have had something else wrong at the time. Anyways that got me...
View ArticleG29 extended commands
hey guys, I've decided to double my 3d printer into a PCB milling machine and have run into a few issues trying to issue specific commands appended to the G29 procedure. I need to probe as many as 15...
View ArticleRe: SD Card Menu on CR-10S
Yeah I would like this too. I dug through config and config adv and didn't find anything config wise to enable/disagle it or any reference to that functioonality.
View ArticleSD print stop
Hello there, I am using Marlin 1.1.8. and I have a question regarding the function "stop printing" (from the menu available on the LCD menu when attached). Every time I use this function, it stops...
View ArticleRe: Is 1.1.7 (and 1.1.8) too big for Creality Melzi board??
I never use SD so its always disabled on my builds... Hmm your heating failed issue, have you run a PID tune yet? I love this stuff too lol
View ArticleRe: Wrong Probe Status
Well now the probe always turns on when the x or y axis moves and won't turn off until reboot or stepper motors are turned off. Any ideas?
View ArticleRe: Jennyprinter 3 , which firmware is correct?
I´m trying to update my Board to Marlin 1.1.8 But my first attempt ended in a non functioning LCD (remained black) Anyone knows, what I did wrong in this config.h? Do I have to add any libraries to...
View Articleunified bed leveling resulting in Z-height issue
Before I used Unified Bed Leveling (UBL), I was using bilinear leveling with BLTouch. everything was fine and calibrated. a 20mm calibration cube would come out ~20mm. But now that i implemented UBL,...
View ArticleWeird temperature issue
I have a tevo tarantula printer and i have marlin easyconfig flashed. My board is the mks 1.4 . Here is my issue.. no matter if i am heating the nozzle or the heatbed, both temps read the same...
View ArticleRe: bed and nozzle temperatures
Having the same issue with my tevo tarantula.. bumping the issue.
View ArticleRe: unified bed leveling resulting in Z-height issue
Yes... It is very possibly a side effect of the fade height. How large is your Z_PROBE_OFFSET_FROM_EXTRUDER number? Or what is the G29 P5 number? If you have a large number (say greater than 1 mm) you...
View ArticleTMC2130 Stallguard endstops not working...
Hello! For the last couple of weeks, I've been trying to figure out why I can't get these to work...no luck, sadly. I've moved my testing out of my printer and into a loose MKS Gen L board, Pins_Ramps...
View ArticleRe: TMC2130 Stallguard endstops not working...
Some of these MKS boards have an external pullup on the endstops, ie not disable in software. This may cause you issues Easy way to test is just move the endstop pin to spare exp port
View ArticleRe: unified bed leveling resulting in Z-height issue
-0.956070 is my value I should to make it zero?
View ArticleBuilding marlin with newer gcc
Hi all, I'm trying to build Marlin 1.1.8 with avr-gcc 7.2, latest avr-libc and ArduinoIDE 1.8.5. During compilation process gcc throws this error: non-constant condition for static assertion on this...
View ArticleRe: unified bed leveling resulting in Z-height issue
Ideally, the mean of the mesh points should be close to 0.000 mm. I think things work out best homing the Z Axis at the center of the bed. If you home in the center of the bed, you can look at the G29...
View ArticleManual mesh levelling with an offset dial gauge
Hi, I'm new to mesh levelling and I'm not yet aware of the automated methods so before I go further down into the code, can I ask whether my wish is already in the code? I have set up 3x3 grid for...
View Article