Re: Marlin Error code 'fpos_t' after 'struct'
Dust. I have not loaded the eeprom as yet. I build a second 3D printer and tried to load my first printer Marlin Config sketch to the second one. Since I have installed the latest Arduino.ide, I...
View ArticleRe: Non-Flat Surface and Bed Auto Leveling
QuoteFloyd I tried this last night with a Z-probe and it seemed to work until it crashed. G28 seemed to work then I did the G29 P1 M It probed 3 points REAL close to the edge of the bed It may be a...
View ArticleZero Z using LCD
Hi. Is possible to Zero Z axis (only!) using LCD? I would like to home X and Y using endstop and Z, manually, taking Z into corret height and zero using LCD. Today, I do this way, but I use computer...
View ArticleRe: Non-Flat Surface and Bed Auto Leveling
I will check tonight and see. My bed is 200mm x 200mm I thought it was odd that the G28 z probe wasnt near the center, it was about 20mm from the edge of the glass.
View ArticleRe: Non-Flat Surface and Bed Auto Leveling
Uploading now. Ill place the nozzle at 100,100 before probe and after G28
View ArticleRe: Non-Flat Surface and Bed Auto Leveling
QuoteFloyd I will check tonight and see. My bed is 200mm x 200mm I thought it was odd that the G28 z probe wasnt near the center, it was about 20mm from the edge of the glass. Well, probably something...
View ArticleRe: Marlin Error code 'fpos_t' after 'struct'
errors are: SdBaseFile.h:199: error: 'fpos_t1' has not been declared SdBaseFile.h:203: error: 'fpos_t1' has not been declared somewhere between your first post and this one you have changed fpos_t to...
View ArticleRe: Non-Flat Surface and Bed Auto Leveling
I got it to finish probing but then it prints a test. The test goes to the edge of the area hitting my binder clips that hold my glass on. Is there a way I can bypass this test?
View ArticleRe: Zero Z using LCD
Hi, Yes its possible..... Have a look at this...... [forums.reprap.org] I added a few extra menu's for my CoreXY printer. I haven't updated my Firmware for a while, hopefully this helps you. Cheers
View ArticleSelf made delta printer homing problem
Hey everyone, I made my own 3D printer a few weeks ago. I used a Ramps 1.4 Board with an Arduino mega. I uploaded marlin to it and I can control the motors. For explaining the problem I'm going to...
View ArticleRe: Need help uploading
Just to make sure, have you already seen text on the display or is it the first time you power it up. Because if it is, there is a little pot meter on the back of the display and you have to rotate it...
View ArticleRe: Need help uploading
Thanks for the input. It was the zipped format of U8glib.rar library file (and location) that hung me up. Some configuration troubles still, as for the new brain "It's Alive!"
View ArticleRe: Non-Flat Surface and Bed Auto Leveling
QuoteFloyd I got it to finish probing but then it prints a test. The test goes to the edge of the area hitting my binder clips that hold my glass on. Is there a way I can bypass this test? There are...
View ArticleRe: Non-Flat Surface and Bed Auto Leveling
Perfect. Ill see if I can try this out tonight. Im thinking about 8-10mm is all I need on the X axis and it will clear the clips.
View ArticleWanting to know more!
I've started playing around with the firmware a little. I'm finding that I am a little more interested than I thought I would be. I'm specifically interested in the Marlin firmware as opposed to...
View ArticleARC command does not allow me to use M114
Hello everyone, I need to run arc while to run reading of axes positions equal lines using M114, but in the arc it is expecting to finish the command to release another command. Is possible do this in...
View ArticleRe: Non-Flat Surface and Bed Auto Leveling
Got it all working last night! Id recommend speeding up the Z speed. The probing was SLOW and took about an hour to do 190mm x 190mm.
View ArticleRe: Non-Flat Surface and Bed Auto Leveling
QuoteFloyd Got it all working last night! Id recommend speeding up the Z speed. The probing was SLOW and took about an hour to do 190mm x 190mm. Those are my Configuration.h setting. My printer has a...
View ArticleRe: Wanting to know more!
Quotekd6hq So I'm looking for something I can read that explains the flow of the firmware. I'm finding different types of files ie. *.h, *.o, *.ccp etc. I would like to know what they all mean. What...
View ArticleThermistor
Hallo, Ich bin Hilko und seit gut einem Jahr befasse ich mich mit dem Bereich 3D-Drucken. Seit einem 3/4 Jahr bin ich selbst Besitzer eines Ultimaker Original mit Heatbed-Upgrade den ich relativ...
View Article