Re: Dual Extruder Firmware Configuration
I have a GT2560 board and have recently built my own dual extruder machine does this also apply to this board.
View ArticleAdding jog buttons to use with auto torch height controller
Hello and thanks in advance .I am using an old version of marlin with a megatronics v2.0.I am looking to add jog buttons for the z axis using a reastat for speed control. ..I would need to them to...
View ArticleRe: Dual Extruder Firmware Configuration
QuoteTerryC I have a GT2560 board and have recently built my own dual extruder machine does this also apply to this board. If you have multiple extruders, the GT2560 can drive them. You would just...
View Articlecan't read all gcode lines or what?
hi all, i am creating gcodes for my delta with laser head atm. i know delta and laser is not a common couple but that's not the point now. i am generating gcodes from vector lines via...
View ArticleRe: can't read all gcode lines or what?
The mosfet output switches the negative side. Most lasers expect the positive side to be switched. Look in [forums.reprap.org]
View ArticleRe: can't read all gcode lines or what?
Quotestephenrc The mosfet output switches the negative side. Most lasers expect the positive side to be switched. Look in [forums.reprap.org] well, i don't really get what you mean but it works fine....
View ArticleRe: Need Help with configuring Marlin Firmware
I'm using the same one, but I have a delta rostock printer and have substituted the configuration.h file from the examples directory for the one in the download. This is what I get the error from. Jerry
View ArticleRe: Need Help with configuring Marlin Firmware
[attachment 83889 config.png] Here is the error I get when I try and compile. Jerry
View ArticleMarlin Delta Firmware--need help
I've built a Delta Rostock Max V.2 and am having a hard time building the Marlin firmware. For Delta printers Marlin says to replace the Configuration.h file with the Delta one in the examples...
View ArticleRe: Non-Flat Surface and Bed Auto Leveling
I use the mesh bed level on my machine from RC7 and it works great!
View ArticleRe: Need Help with configuring Marlin Firmware
I think the best thing to do is take a visual diff program like NotePad++ or ExamDiff Pro and compare your Configuration.h file to the one that is included with the release. You should be able to move...
View ArticleRe: Non-Flat Surface and Bed Auto Leveling
QuoteFloyd I use the mesh bed level on my machine from RC7 and it works great! There will be a new version of devel_UBL uploaded later today or early tomorrow. If you like the RC-7 version of Mesh...
View ArticleRe: Need Help with configuring Marlin Firmware
The config file I'm using is the one from the release, but it came out of the examples folder. For a Delta printer you are supposed to replace the regular Configuration.h file with the one from the...
View ArticleZ MIN PROBE USES Z MIN ENDSTOP PIN -- confusion.
I am having a bit of a time understanding how this should be setup. First I'm using a RAMPS 1.4 / Arduino Mega 2560 combination. I'm using Marlin 1.1.0-RC6. I have an inductive probe plugged into the...
View ArticleRe: When homing, z bed moves down before going up, crashing into brackets
I have the same problem on my corexy, any solution on this jet?
View ArticleLCD display corrupted during print
I'm using the Marlin RCBugFix branch, but this issue has happened with RC6 and RC7. I have a REPRAP_SMART_DISCOUNT_CONTROLLER (non graphical). When printing, the LCD display gets corrupted very...
View ArticleCompiling error while setting up auto bed leveling
Dear forum members! I am trying to get auto bed leveling for my modified K8200 3D-Printer. (Marlin 1.1.0-RC7) I have an mechanical z-endstop at the z-min port of my RUMBA controller board and an...
View ArticleRe: LCD display corrupted during print
Make sure the cables going to the lcd are short as possible (under 12") and not routed next to anything like stepper motor wiring.
View ArticleMelzi board (ATmega 1284P) + LCD12864 + Marlin: is it possibile?
Hello! Actually I have a melzi board with atmega1284p and a lcd 2004 (the 5 button ones without the SD) with Marlin, I'd like to change the LCD with the LCD 12864, do you have any links or suggestions...
View ArticleRe: Z MIN PROBE USES Z MIN ENDSTOP PIN -- confusion.
The first thing to do is give it a M119 and see what end stops it thinks it has, and what their status is. And then use your finger to alter the status of each end stop and verify you can see its...
View Article