Re: How to use AutoBedLeveling for CNC stock surface mapping ?
Well, i started to look at your mod's, and i see that we are taking 2 totally different approaches. If what you have is currently working, but, you mainly want to keep the mapping from getting...
View ArticleRe: Need help with FW upgrade of Dual X Carriage, Dual Z
It has been a few days and I see that this has been view a bunch but no one has posted a response. Is there a better forum to post to with users that may have a better understand the Marlin firmware?
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
QuoteUnLtdSoul Your using a -15.7mm Probe Z offset, which I assume is the offset using an installed bit, but, won't that change when you change out your bit? So, you would have to know what that...
View ArticleRe: Display problem on reprapdiscount full graphic smart controller display.
That's not the problem, its show a fine contrast, in the previous marlin version, it was okay.(that adjustment was the first thing I did),
View ArticleRe: Display problem on reprapdiscount full graphic smart controller display.
I found the solution by myself, in the "configuration_adv.h" make comment (place two slashes) "#define XYZ_HOLLOW_FRAME" and also "#define MENU_HOLLOW_FRAME" Hardy
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
QuoteUnLtdSoul Well, i started to look at your mod's, and i see that we are taking 2 totally different approaches. If what you have is currently working, but, you mainly want to keep the mapping from...
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
I took a look at your Marlin_main.cpp file again, wanted to look at your G30 code, and I am not seeing the function. What used to be the gcode_G30() function is now called old_gcode_G30() I do see in...
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
Its because i have made many tests with gcode_g30() and nothing works as i want. I want to execute a zprobe (G30) without lose the autoleveling data but had no success until now. Inside gcode file i...
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
Im sorry if i keep repeating this, but im assuming i didnt clear. I dont want to be talking again and again about my problems, but this one is driving me crazy. I have bypassed all parts i guess can...
View Article"bugfix-1.1.x" and "Viki2" not working
Hello everyone, I wanted to change my firmware from Marlin-1.1.4 to Marlin-1.1.6, but it will not compile (cant remember the error). So I decided to use the most current (downloaded today)...
View Articlemotor being hotest
Hello every body i hope someone could help me i have my own 3d printer and i work with Marlin1.1 firmware, now i pass some problem like vibration without rotating and now the motor is working but it...
View ArticleRe: Motors Speed painfully slow
thank u i put the speed 500 mm/s it is faster speed i can work in it so maybe no solution for this case but i have a problem ,My motors were very hot quickly and i don't know why i tried test program...
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
G28 clears the bed leveling data for most of the bed leveling systems. G28 does NOT clear the state or data for UBL.
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
G28 is not the problem. My problem is G30. I dont want G30 to clear bed leveling data, but cannot find where to by-pass code...
View ArticleRe: motor being hotest
several things possible. There is no change in programing tho, no line in marlin will fix this. First was this working ok before? IF so what changed? look at changes first. Then if this is a new build...
View ArticleI want to learn how pause process works
I want to learn how pause process works, because I want to eeprome it then power the printer off and power it on again then continue printing. Where can I lean that process ? If from marlin where...
View ArticleRe: Reconfiguring / swapping T0 for T2
Finally received a new Arduino MEGA 2560, but unable to load any programs to it. The yellow LED on the board flashes continuously as soon as the USB cable is connected. Trying to upload any program...
View ArticleMK2 Multiplexer Confirguration Help
Can someone point me to a URL where I can review the setup procedures for MK2 Multiplexer utilization I'm attempting to configure in Marlin 1.1.6. I've un-slashed the "#define MK2_MULTIPLEXER" and...
View ArticlePin D2 and X motor driver steps
I'm trying to get a laser diode working with my Tevo Tarantula. It's running a Biqu MKS Base v1.4 with Marlin. I spent quite a bit of time trying to get PWM control working; ended up using the X+...
View ArticleRe: Please help, strange movement while printing
i had exactly this happen with a bad sd card. changed the card, it's gone. Maybe easiest fix?
View Article