Re: How to use AutoBedLeveling for CNC stock surface mapping ?
I'm trying to do the same thing. As for the probe, I made a 3D print, attached to the spindle shaft. The whole system is working except that when I change the tool in the middle of the job and try to...
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
ProSoft - OK so fill me in on how you are using the ABL feature. I never got it set up on my system yet, because i was thinking that the way Marlin works it won't work for CNC use, but, it looks like...
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
I made some modifications in the marlin and in the postprocessor. In marlin, I deactivated the requirement of homing before leveling. Even so, right at the beginning of the leveling i must first do a...
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
I forget something... "So, how do you compensate for that?" Use Z probe offset setting as a negative number. (at first im using a positive number)
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
I made various changes to lcd to take off all 3dprint related menus, and to simplify things...
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
I haven't compiled and ran it yet, but, in the configuration.h file I've added a define - right after the defines to enable leveling: #define AUTO_BED_LEVELING_BILINEAR // ADDED following: #define...
View ArticleRe: zprobe loses autolevel
homeing Z after doing a autolevel will erase the auto level data
View ArticleRe: zprobe loses autolevel
Z probe acts the same as homming? Do you know where in the code data is erased
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
I will try it again, but i already find this portion of code and after disabling that, not changed. The leveling data keeps being deleted...
View ArticleRe: zprobe loses autolevel
The auto level data is stored in the eeprom. To clarify my previous statement, If you do a G29 ; probe bed level G28 ; home all axis G29 will perform the bed levelling ans store the results in the...
View ArticleRe: zprobe loses autolevel
I want a G30 after a tool change, without loosing bed level data (MILLING CNC)
View ArticleRe: Non-marlin to marlin upgrade, help needed
Well, i know the board, problem is the bits connected to it. Temp sensors and heaters.
View ArticleRe: Non-marlin to marlin upgrade, help needed
My point is... If this is a Prusa clone, and it is running the Prusa firmware... That is Marlin. It will be a modified version of Marlin. But it is Marlin. If what I'm saying is true, you should be...
View ArticleNeed help with FW upgrade of Dual X Carriage, Dual Z
I built a Dual X Carriage with Dual Z Motors a few years ago and want to upgrade to the newest stable version of Marlin. This is what I am currently running, 1.1.0 RC3 (i think). Hardware is Oversized...
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
Any News? Have you tested my changes?
View ArticleProblem flashing Marlin onto Melzi board.
Hi, I have a Tronxy P802ma printer with a Melzi V.3.0 board. I used Arduino IDE to flash a Tronxy Master Firmware for Marlin onto the Melzi. I set the USB jumper correctly and flashed the firmware...
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
Sorry I was tied up on the weekend. I didn't really understand the way Marlin worked regarding X Y Z positions, it keeps track of a RAW and a LOGICAL data set. Anyway, that made the whole thing a bit...
View ArticleDisplay problem on reprapdiscount full graphic smart controller display.
I have update my ramps 1.4 board with the latest Marlin firmware, but now in the menu choice there is no switch off the text from white on black, there is only a frame around it, it is therefore much...
View ArticleRe: How to use AutoBedLeveling for CNC stock surface mapping ?
I will try to explain how i use it: When I turn on the CNC, the tool is already positioned about 30mm above the workpiece at the point of origin (0,0). Its the stock (workpiece) origin, not the...
View ArticleRe: Display problem on reprapdiscount full graphic smart controller display.
On the back of the display board should be a contrast adjustment ,try altering that.
View Article