Re: MKs base v1.4 no option in marlin for EEFB
Reversed one end of the cables....fixed!
View ArticleError message when configuring auto bed leveling
#elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION #error FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION. exit status 1 missing binary operator before token "#" No matter...
View ArticleRe: Error message when configuring auto bed leveling
Fix the probe position for the front to be a lower value than what is for the rear. The probe offsets also affect this. These are the defines that are causing the error: #define...
View ArticleRe: Error message when configuring auto bed leveling
Yeah...I have that setup..but still get the error. Ok, I am posting the complete error message then I will post up my settings and see if you can see whats wrong. Hopefully that will be helpful in...
View ArticleRe: Error message when configuring auto bed leveling
I don't see any problems in the section you posted. Looks like you may have a missing # somewhere. If you download a fresh copy of Marlin, does it compile fine? If it does, uncomment just the auto bed...
View ArticleRe: Error message when configuring auto bed leveling
The # in preprocessor macros has double meaning. First it is used in #include #if etc. It is also string concatenation. Are you sure your SanityCheck.h has line 174 #elif FRONT_PROBE_BED_POSITION >...
View ArticleRe: Error message when configuring auto bed leveling
Thanks guys! Started with a new Marlin download and just put my settings in it and it loaded just fine. The only thing I can think of is maybe I accidentally deleted the "#" and did not see that I...
View ArticleRe: Dual extruder with different step/mm
MarlinKimbra support 4 extruder width different Step /mm, feedrate, acceleration, retraction acceleration, ejerk: #define DEFAULT_AXIS_STEPS_PER_UNIT {160,160,160,451,625,625,625} #define...
View ArticleZ axis height after homing
Hello everyone, I currently am using a buildtack material on the surface of my build plate, which has worked wonderfully for printing except for one issue. After the homing process my Z axis is...
View ArticleRe: Z axis height after homing
I would add a G1 F300 Z5 right after the home in you pre-print code in your slicer (or manually add it to the generated code). This will move the z axis up 5mm then when the temp is reached and...
View ArticleFull graphics smart controler set up
Hi all, I have recently purchased a Full Graphics Smart Controller to use with my Mini Rambo 1.3 board, but im having a hell of a time getting it to work. So after three nights of banginng my head...
View ArticleRe: Full graphics smart controler set up
In Marlin you often have to disable the default display driver too.
View ArticleRe: Full graphics smart controler set up
Thanks for the tip. Where would I find the section of code I need to ommit? Or is it an entire library?
View ArticleMarlin successfully calibrated on ultimaker clone but not responding when...
Hi All, I'm building my first 3d printer following this design. So far i have found very useful tips over here, but now it seems i'm really overlooking something. I have installed a rumba board, blown...
View ArticleRe: Full graphics smart controler set up
The default driver ( if any ) is in the same section, called REPRAP_DISCOUNT_SMART_CONTROLLER In newer versions of Marlin you have to enable SD_support, too But it is still possible, you've placed the...
View ArticleRe: Full graphics smart controler set up
The first time i used my smart controller i also only saw a blank screen. If i looked really closely i could see some icons in the screen. It turned out to be a contrast problem, adjusting the pot on...
View ArticleRe: Auto Bed Leveling not level
Here is my latest G29 probing 4 points using a proximity detector on a 1/2" MIC6 aluminum bed. I am printing some parts and will measure the skirt when it is done. The Z-Axis moves very slightly while...
View ArticleRe: Loading Firmware on Melzi 2.0
So my Prusa has a LCD with 5 buttons and from my research these are analouge and Marlin does not support them. I have the source code which has an older version of Marlin but repeteir supports this...
View Articlecan't print from sd card
for some reason i can no longer print from my sd card i get this in the log it prints just fine over usb any ideas 23:21:06.141 : N76 M25*37 23:21:07.072 : N77 M105*23 23:21:08.172 : N78 M105*24...
View Article