I guess by posting I have tapped into reprap hive consciousness as day later I had 2 ideas:
1 - Switch to bang- bang mode for heated bed- Temp achieved, overshoots a little so further stability testing is required.
2- I am using a Lite6 and with it PWM is set to 150 as per E3D recommendation. I suspect it might affect the Bed even tho its set to max 255. Will be testing soon to confirm that.
1 - Switch to bang- bang mode for heated bed- Temp achieved, overshoots a little so further stability testing is required.
2- I am using a Lite6 and with it PWM is set to 150 as per E3D recommendation. I suspect it might affect the Bed even tho its set to max 255. Will be testing soon to confirm that.