Lets see some testing results!
Also .4mm layers with a .4mm nozzle is insane! General rule of thumb is never go more than 80% the nozzle diameter for layer height.
With my .4mm nozzle .3mm is my fast and dirty mode and .1mm and .2mm layers are for better models.
Also .4mm layers with a .4mm nozzle is insane! General rule of thumb is never go more than 80% the nozzle diameter for layer height.
With my .4mm nozzle .3mm is my fast and dirty mode and .1mm and .2mm layers are for better models.