Re: Tower angular position corrections in Marlin
I see. Okay thank you for the response!
View ArticleFirmware Software Engineers Required!
A very well known 3D printing company is looking for excellent Firmware Software Engineers, ideally with an educational background in computer science / Electronics / Telecomunicaton.
View ArticleRe: Marlin RC5 - MKS_13 vs MKS_BASE
Quotegaraguido i used the newest Arduino software 1.6.8 with RC5 and there where no errors at all . The release notes are not emphatic enough. But you REALLY need to use Arduino V1.6.8 because we...
View ArticleAnyone have Marlin RC files setup for Makerfarm I3v mesh leveling
Anyone have the Marlin config.h files setup for Makerfarm I3v Vslot using mesh leveling ? Preferably RC5 or RC6? What do i have to change on RC6 for endstops and mesh leveling with I3v 12" ? I know...
View ArticleDual Extruder Firmware Configuration
Hi everyone, I am trying to build a dual extrusion 3D printer which i have the Marlin RC Firmware uploaded. I have configured the Extruder count in Marlin to 2, changed the temp sensor settings, but i...
View ArticleRe: Dual Extruder Firmware Configuration
"#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,4000,500} // default steps per unit for Ultimaker" this defines steps/mm for X,Y,Z,E but where is E2? If it identical to the first extruder try #define...
View ArticleRe: Marlin 1.0.5 with different E step
I have solved the LCD display problem by removing the // in the line //#define REPRAP_DISCOUNT_SMART_CONTROLLER. I hope this will be helpful for someone google the same problem. I have another...
View ArticleSimple way to edit marlin firmware?
Please lord let there be a simple way to edit the firmware,, I just spent 3 hours, loading and reloading Arduino,,, no luck. Program loads,, then what??? I have followed every tutural on the web,,...
View ArticleRe: Simple way to edit marlin firmware?
If you are not familiar with the Arduino environment, then there is no easier way. :(
View ArticleBL Touch firmware marlin problem
Hi all, i post this soner in the RAMPS forum, but i think its better in the marlin forum the problim is that i get the error #error A probe should not be connected to more then one pin!...
View ArticleRe: BL Touch firmware marlin problem
We have opened up a new section in the MarlinFirmware repository for documentation. The very first thread in this new area was chosen to be on this topic. [github.com] (So in other words... I feel...
View ArticleRe: BL Touch firmware marlin problem
I have this line commented out. #define Z_MIN_PROBE_ENDSTOP Since this line already defines the pin it uses: #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
View ArticleHelp needed for SLS printer
Hi guys I am building a SLS printer. I am using Ramps 1.4 and Marlin 1.1.0 RC5. I configured Marlin to work with my machines specifics. For turning on and off the laser diode I planed to use the...
View ArticleRe: Simple way to edit marlin firmware?
QuoteSlackdaddy I was NEVER able to find my printer through the Arduino program,, Sounds like you need to install the drivers for your particular board. Which chip is used for the usb - serial...
View ArticleRe: Help needed for SLS printer
What is the problem with switching layers? Is it leaving the laser turned on as it changes position? And I presume, you want the laser off while it is changing layers???
View ArticleWhats your board?
What kind of printer do you have? Many Arduino boards are supported "out of the box" with the Arduino IDE, but not all 3D printer boards necessarily. Gen7, Sanguinololu, and some others may need to...
View ArticleRe: Dual Extruder Firmware Configuration
Thanks DUST, i had the same issue , it works .
View ArticleRe: Help needed for SLS printer
As you say, I give the command to the pin but it don't turn off on layer change, it works on manual command but not from gcode. If you need more information I can give more details about the machine...
View ArticleRe: Simple way to edit marlin firmware?
QuoteSlackdaddyPlease lord let there be a simple way to edit the firmware,, There is such a simple way: [attachment 77487 TeacupConfigtool.png] It's Teacup Configtool. No text editor, no Arduino IDE,...
View Article