Quote
jmalinski
I have a printer I have been using for 2 and a half years . It runs great and prints very good. We use it daily. My son and I are prototyping medical devices for veterinary medicine. Our problem is this. My laptop was stolen with all my printer backup files. How can I get a copy of my Marlin firmware for this printer. It took almost a year to get it printing as good as it does, and that was painstakenly tweaking over long a period of time. I don't know enough about the Arduino mega to figure out how to download the firmware on the machine right now. Can anybody help?
Unfortunately, I don't think you can go back. The Arduino IDE takes those files you configured and compiles them all into a binary file which is what gets uploaded to the printer. It can't reverse the process. Here's a thread that talks about how to retrieve the binary firmware file from the board, but that would just be a backup for you. You wouldn't be able to do anything with it as far as recreating your source files.
If you do an M503, it will print some of the settings in use and you might be able to match some of those up to the settings you had in Configuration.h. You will see things like your feed rates, acceleration, X/Y jerk, etc. There might be some other g-codes that might give you more clues as to the settings you had configured. It might take some tedious detective work, but you might be able to piece together most of what you had before.