Re: Extruder retracts before start of print

Here you go:

;FLAVOR:Marlin
;TIME:7176
;Filament used: 10.6086m
;Layer height: 0.2
;Generated with Cura_SteamEngine 3.4.1
M190 S65
M104 S205
M109 S205
M82 ;absolute extrusion mode
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 ;move X-Y-Z to min endstops
M420 S1 ;Enable Mesh leveling
G92 E0 ; zero the extruded length
G1 X35Y10Z0.2 F5000 ;move out of print volume
G1 X80 E9 F500.0 ;start purge line
G1 X120 E12.5 F500.0 ;finish purge line
G92 E0
G1 F3000 E-3
;LAYER_COUNT:121
;LAYER:0
M107
G0 F7200 X67.718 Y55.125 Z0.2
;TYPE:SKIRT
G1 F3000 E-0.12473