Update: I may have found the issue. I had uncommented #define DISABLE_MAX_ENDSTOPS, which for some reason was causing Z homing not to function correctly. I commented this back out again, and now z homing works as before. Auto bed leveling seems to work, but I believe all this testing and crashing has made the x carriage lopsided because on the far right the probe crashes the bed. I will adjust and try again.
I have not tried to print yet, but I believe setting min_software_endstops = false will probably fix the initial issue.
Thanks again for your help.
I have not tried to print yet, but I believe setting min_software_endstops = false will probably fix the initial issue.
Thanks again for your help.