Quote
pcsentinel2
Hi, thought it was all solved, It seems to all be working fine, and I see the Z motors turn as the head moves though the print so its adjusting the Z Height, but it doesn't seem to be adjusting enough. so if I print many things across the plate The back left has a thick first layer and the front right is squashed. As I say I can visibly see the Z motors adjusting height but it just seems that its not adjusting enough.
Which bed leveling system are you using? It sounds like it is the Grid Based or Linear bed leveling. That works well if your bed is flat. But even pieces of glass that look flat, are not flat. In that case, a mesh based bed leveling system is going to give you better results.