Re: Bed leveling data saved?

I save My Bi-Linear Grid and restore it using Marlin 1.1.X
Changed to a 4 x 5 Grid for testing Bed level data saving for this POST.
Bed leveling has to be turned back on before every Print after auto homing.

I did not realize this but I must have saved with one of the other methods.
It appears that G29 some commands do not work with Bi-linear.
M500 or Push the " Store Settings " menu item, but the Data is being saved and reused
working G29 commands for Bi-Linear
[B {linear}] Set the back limit of the probing grid
[F {linear}] Set the front limit of the probing grid
[L {linear}] Set the left limit of the probing grid
[R {linear}] Set the right limit of the probing grid
[S {rate}] Set the XY travel speed between probe points


G28
G29

Bilinear Leveling Grid:
----- 0------ 1------ 2------ 3
0 -0.356 -0.059 -0.136 -0.213
1 -0.023 +0.054 -0.085 -0.240
2 +0.083 +0.053 -0.087 -0.250
3 +0.084 -0.025 -0.133 -0.258
4 -0.001 -0.170 -0.236 -0.311
X:198.00 Y:220.00 Z:10.74 E:0.00 Count X:15840 Y:17600 Z:16800
M420 S1
echo:Bed Leveling On
echo:Fade Height Off

Video is a little jerky

[youtu.be]

Just knowing you can save a Bi-linear grid an recover it saves time