Quote
Roxy
Did you do a M502 followed by a M500 ?
Yes, even used the new Init EEPROM menu line.
I printed many models even after Marlin 1.1.5 gives " Endstops Z ". including the M500 Memory CRC error.
Here is the latest testing results.
Raise bed to 100mm and Auto home, after the X and Y Axis home we single tap the Z-Proximity sensor with a metal putty knife simulating the bed 100 mm above the real bed.
It will detect what it believes is bed rise 10mm then drop down again to what it believes is new Z-Axis zero, once more will rise to what i believe is Z_CLEARANCE_DEPLOY_PROBE 10
this time it has no error. Though I am 100mm above the bed.
Only when I auto home on the bed is " Endstops Z " error displayed. It is only an error message, does not stop printer from functioning correctly from what I can tell.
Marlin 1.1.5 using M500 causes CRC errors.
Will have to look at the code, something changed from Marlin-RC8BF-HICi3("Marlin 1.1.0 Woozy Wookiee"). May import all new changes one by one into Marlin-RC8BF-HICi3
Is there a way to test the 8K data ram on a ATMega2560 16AU
SRam was changed #5668, #6409, #6964, #6965 and #7032