Quantcast
Channel: Reprap Forum - Firmware - Marlin
Viewing all articles
Browse latest Browse all 12090

Re: No variable speed with fan on D9 RAMPS 1.4

$
0
0
The only extra thing I can add is the Slicer's have a setting for what the minimum pulse width needs to be to have the fan turn. Usually something like 50%. It might be good to slice a few parts with Slic3r and tell it to have different speeds for different things and see if it can control the fan speed. If so... you can look at what it is doing and learn from it.

Viewing all articles
Browse latest Browse all 12090

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>