Quantcast
Channel: Reprap Forum - Firmware - Marlin
Viewing all articles
Browse latest Browse all 12114

Re: Extruding problems

$
0
0
The other settings are exactly the same. The only settings I change when i print for 0.06 and 0.1 are printing speed and infill speed. Just these two. And I posted them above: ,, I printed the same part at 0.06mm layer height with 60mm/sec print speed and 80mm/sec infill speed and the print was wonderful. Same thing for 0.1 mm height at 60mm/sec print speed and 60mm/sec infill speed"

Viewing all articles
Browse latest Browse all 12114

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>