Ok, so here is the problem I have encountered.
I am trying to setup my printer with dual hot ends, fan and heated bed EEFB but there is no option for this using any of the RAMPS selections. The closest I can do is either Motherboard 34 or 36 which is either EEF or EEB. When I tried 34 it thinks my fan is the 2nd hot end but still....no way to take advantage of the heated bed. MKs Base v1.3 and MKs Base v1.4 both have 4 drivers and capable of running EEFB but there is no option in Marlin that I see to take advantage of this. Can someone please point me in the right direction if there is one. Sorry if this is a known issue or a newbie problem...I am still very new to 3d printing (6 months under my belt, LOL) but learning fast and could not find any info on this.....so I figured I would ask the experts. :-)
I am trying to setup my printer with dual hot ends, fan and heated bed EEFB but there is no option for this using any of the RAMPS selections. The closest I can do is either Motherboard 34 or 36 which is either EEF or EEB. When I tried 34 it thinks my fan is the 2nd hot end but still....no way to take advantage of the heated bed. MKs Base v1.3 and MKs Base v1.4 both have 4 drivers and capable of running EEFB but there is no option in Marlin that I see to take advantage of this. Can someone please point me in the right direction if there is one. Sorry if this is a known issue or a newbie problem...I am still very new to 3d printing (6 months under my belt, LOL) but learning fast and could not find any info on this.....so I figured I would ask the experts. :-)