Hello, hoping i could get some help or pointed in the right direction.
I am having uses trying to get a mesh with AUTO_BED_LEVELING_BILINEAR.
I recently changed out my BL-Touch (it was working great before) for the Bed Distance Sensor (https://www.pandapi3d.com/product-page/bed-distance-sensor). It gave me some issues to get working. So much so that I had to change firmware to Marlin-bugfix-2.1.x_skr1_4_20240418. I was eventually able able to get it working (some what) I still am having issues where the Nozzle temp is reading 0/0 (zero) and when I do an M119 the " z_min:" is not showing up. But it still homes just fine and reads the distances correctly. I will fix those issues after this one.
The issue I am having with the ABL Bilinear is that it only probes the first 6 positions then stops. It doesn't matter how many points I put in 9, 36 still stops after 6 probes.
I have tried a bunch of different things like changing how many probe points, changing the distance from the bed for it gets to far away and stops, making the area for the printer probe smaller, and a few others I cant remember.
But It keeps doing the same thing.
I have attached my config's, hoping someone can look thru it and see if I have something wrong.
Any help on this would be great, I have been at this for days trying to get it to work.
Thank you
I am having uses trying to get a mesh with AUTO_BED_LEVELING_BILINEAR.
I recently changed out my BL-Touch (it was working great before) for the Bed Distance Sensor (https://www.pandapi3d.com/product-page/bed-distance-sensor). It gave me some issues to get working. So much so that I had to change firmware to Marlin-bugfix-2.1.x_skr1_4_20240418. I was eventually able able to get it working (some what) I still am having issues where the Nozzle temp is reading 0/0 (zero) and when I do an M119 the " z_min:" is not showing up. But it still homes just fine and reads the distances correctly. I will fix those issues after this one.
The issue I am having with the ABL Bilinear is that it only probes the first 6 positions then stops. It doesn't matter how many points I put in 9, 36 still stops after 6 probes.
I have tried a bunch of different things like changing how many probe points, changing the distance from the bed for it gets to far away and stops, making the area for the printer probe smaller, and a few others I cant remember.
But It keeps doing the same thing.
I have attached my config's, hoping someone can look thru it and see if I have something wrong.
Any help on this would be great, I have been at this for days trying to get it to work.
Thank you