I have not changed the Last Update date, so it is still showing the old one.
This is the log with updated date:
This is the log with updated date:
start Marlin 2.1.2.4 echo: Last Updated: 2024-10-04 | Author: Timothy Franceschi echo: Compiled: Oct 4 2024 echo: Free Memory: 3702 PlannerBufferBytes: 1200 echo:Hardcoded Default Settings Loaded echo:; Linear Units: echo: G21 ; (mm) echo:; Temperature Units: echo: M149 C ; Units in Celsius echo:; Filament settings (Disabled): echo: M200 S0 D1.75 echo:; Steps per unit: echo: M92 X80.00 Y80.00 Z400.00 E500.00 echo:; Max feedrates (units/s): echo: M203 X300.00 Y300.00 Z5.00 E25.00 echo:; Max Acceleration (units/s2): echo: M201 X3000.00 Y3000.00 Z100.00 E10000.00 echo:; Acceleration (units/s2) (P R T): echo: M204 P3000.00 R3000.00 T3000.00 echo:; Advanced (B S T J): echo: M205 B20000.00 S0.00 T0.00 J0.01 echo:; Home offset: echo: M206 X0.00 Y0.00 Z0.00 echo:; Material heatup parameters: echo: M145 S0 H180.00 B70.00 F0 echo: M145 S1 H240.00 B110.00 F0 echo:; Hotend PID: echo: M301 P22.20 I1.08 D114.00 echo: SD card released